Call me
Torsa Office Chair - it's unlimited possibilities combined with innovations inspired by nature. New engineering solutions have led to the creation of a unique U-support that adapts to the seated individual, providing complete spinal support throughout the entire work process. With its refined design, ultra-durable mesh, robust construction, full spinal support, and expanded functionality, the Torsa chair embodies it all.

Torsa is an excellent task choice. Cutting edge design, 4 frame/arm/back support color combinations, 10 mesh colors, improved synchronization with comfort drive and seat, depth adjustment, textured control knobs, comfortable and durable mesh back, waterfall seat - there is something that needs attention in every office.
The waterfall seat is constructed with a slightly forward-sloping upper edge. This design alleviates pressure on the back of the legs and provides the ability to work comfortably throughout the entire day.
The Torsa Chair seamlessly blends cutting edge design with an innovative spinal support mechanism and cable-operated Comfort Drive® timing mechanism. The seat back is covered with an ultra-durable mesh that doesn't accumulate dirt, returns to its original state after prolonged use, cleans well, and doesn't retain signs of mechanical damage.
The Torsa chair series features a unique Y-shaped spinal support that enables comfortable all-day sitting without fatigue. The distinctive support structure provides complete comfort for creating a productive work environment. To adjust the height of the lumbar support, move the runners on the back surface of the seat back to the desired level.
The height adjuster is located under the seat on the left side, just behind the seat depth adjuster. Several positions are available on the height switch. To raise the seat, pull the lever upwards and slightly stand up. The correct position is considered to be when the angle at the knee joint is about 90 degrees, and the feet are fully on the ground.
The seat depth adjuster is located on the left side, near the seat back height adjuster switch. To move the seat backward or forward, pull the lever upwards. Specialists recommend setting a seat depth where the distance between the edge of the seat and the sitter's knees is 5-8 cm.
The tilt tension of the backrest can be increased or decreased by turning the knob located under the seat on the right side. Simply pull the handle to the side and turn it forward or backward. The tilt lock is located on the seat base, above the handle. Set the backrest tilt to support the spine correctly, preventing the sitter from slumping backward.
You can adjust the position of the armrests in two directions: vertically and horizontally. The height lock is located in front on the outer side of the armrest, just below the handle. The width locks are on both sides of the chair, at the bases of the armrests. To adjust the armrest width, lower the lever. The correct positioning of the armrests, where the angle at the elbow joint is 90-120 degrees, reduces the strain on the arms.
The forward/backward tilt of the backrest is adjusted using the lever on the left side of the chair. To decrease the tilt, the forward tilt is adjusted with the outer lever, and the backward tilt with the inner lever. Several fixed backrest positions are available, from upright to semi-reclined. The optimal angle is around 7-10 degrees.
The chair comes equipped with castors designed for carpet flooring, which do not scratch the floor.
Article: 6023 Y/e3 A134 FG4 C25 B14 MC5 FC11 Z3 KD
Weight Capacity: 150 kg
Back material: Aluminum / Plastic
Backrest Style: High-strength mesh
Seat: Soft
Textile: Grad3
Armrests: Multi-functional adjustment (height/width)
Base: Polished aluminum
Color: Fog
Base Color: White
Frame Color: White
Castors: carpet castors
Official Warranty: Lifetime